Philips HeartStart FRx Defibrillator with Standard Carry Case and Pads

Defibrillator

HeartStart FRx AED specifications:

Model number: 861304
Includes defibrillator, battery, SMART Pads II (1 set), Setup and Maintenance Guides, Owner’s Manual, Quick Reference Guide, date sticker

Waveform: Biphasic truncated exponential; waveform parameters are automatically adjusted as a
function of patient defibrillation impedance

Therapy: Adult defibrillation: nominal peak current 32 A (150 J nominal into a 50 ohm load) Pediatric defibrillation with optional FRx Infant/Child Key installed: nominal peak current 19 A (50 J nominal into 50 ohm load)

Protocol: Device follows preconfigured settings; defibrillation and CPR protocol can be customized using HeartStart Event Review Pro software

User interface

Instructions: Detailed voice prompts and visual icons guide responder through use of the defibrillator

CPR guidance: Verbal instructions for adult and infant/child CPR provide instructions and audio cues for the appropriate number, rate and depth of chest compressions, as well as for each breath

Controls: Green On/Off button, blue-lit i-button, orange Shock button, optional Infant/Child Key Indicators Ready light, blue-lit i-button, caution light, illuminated pads, icons; Shock button lights up when shock is advised

Physical

Size: 18 x 6 x 22 cm (7.1 x 2.4 x 8.8 in) H x D x W

Weight: Approximately 1.6 kg (3.5 lb) with battery and pads installed

Environmental/physical requirements

Sealing: Waterjet-proof IPX5 per IEC60529
Dust-protected IP5X per IEC60529

Temperature: Operating/Standby: 0° – 50° C (32° – 122° F)
Transient operating (for 20 minutes or less, after rapid transition from 20° C [68° F]): -20 to 50° C (-4° to 122° F); under non-condensing humidity conditions

Altitude: 0 to 4,572 m (0 to 15,000 ft)

Aircraft: Meets RTCA/DO-160 Section 21 (Category M – Radiated Emissions) and Section 20
(Category M – Conducted Immunity, and Category D – Radiated Immunity)

Crush: 500 kg (1100 lb)

Drop: Withstands 1.22 m (4 ft) drop on any edge, corner or face of the device onto masonry surface

Vibration: Operating: meets MILSTD 810G Fig. 5146E-1, random
Standby: meets MILSTD 810G Fig. 5146E-2, swept sine (helicopter)

EMI: (radiated/ immunity) Meets CISPR 11 Group 1 Class B and IEC 61000-4-3

Data recording and transmission

Infrared: Wireless transmission of event data to a PC using the IrDA protocol

HeartStart Event Review Pro software: Data management software (optional) for download and review of data retrieved through defibrillator’s infrared data port

Data stored: First 15 minutes of ECG and the entire incident’s events and analysis decisions

Patient analysis system

Patient analysis: Evaluates patient ECG to determine if a rhythm is shockable. Rhythms considered shockable are ventricular fibrillation (VF) and certain ventricular tachycardias (VT) associated with lack of circulation. For safety reasons, some VT rhythms associated with circulation will not be interpreted as shockable, and some very low-amplitude or low-frequency rhythms will not be interpreted as shockable VF.

Sensitivity/specificity: Meets AAMI DF80 guidelines and AHA recommendations for adult defibrillation

Shock advised: Able to deliver a shock as soon as the device indicates a shock is advised

Quick Shock: Able to deliver a shock after the last chest compression of a CPR interval, typically in 8 seconds

Shock-to-shock cycle time: Typically less than 20 seconds between shocks in a series

Artifact detection: Allows ECG analysis even in the presence of most pacemaker artifact and electrical noise sources; other artifacts are detected and corrective voice prompts issued

Battery

Item numbers: Standard: M5070A Aviation: 989803139301 (TSO-C142, U.S. only)

Type: 9 Volt DC, 4.2 Ah, lithium manganese dioxide, disposable long-life primary cell

Capacity: When new, a minimum of 200 shocks or 4 hours of operating time at 25° C (77° F)

Install-by date: Battery is labeled with an install-by date of at least five years from date of manufacture

Standby life: Typically, four years when stored and maintained according to directions provided in the Instructions for Use

SMART Pads II

Item number: 989803139261

Active surface area: 80 cm2 (12.4 in2) each

Cable length: 121.9 cm (48 in)

Use-by date: Pads case is labeled with a use-by date of at least two years from date of manufacture

Infant/Child Key: Item number: 989803139311

Training Pads II

Item number: 989803139271

Function: Special pads place the FRx into training mode and disable its energy delivery
capability; features eight real-world training scenarios

Automated and user-activated self-tests

Daily automatic self-tests: Tests internal circuitry, waveform delivery system, pads and battery capacity

Pads integrity test: Specifically tests readiness-for-use of pads (gel moisture)

Battery insertion test: Upon battery insertion, extensive automatic self-tests and user interactive test check device readiness

Status indicators: Blinking green “Ready” light indicates ready for use; audible “chirp” indicates
need for maintenance

Philips HeartStart FRx Semi-Automatic Defibrillator: Durable and User-Friendly AED

The Philips HeartStart FRx Semi-Automatic Defibrillator is designed for reliable performance in emergency situations. Its rugged construction and intuitive operation make it ideal for use in high-stress environments, ensuring effective treatment during sudden cardiac arrest (SCA).

Key Features of the Philips HeartStart FRx

• Semi-Automatic Operation: Analyzes heart rhythms and prompts the user to deliver a shock when needed, ensuring fast and accurate response during emergencies.

• Rugged, Durable Design: Built to withstand harsh conditions, the FRx is water and dust resistant (IP55 rating) and can endure drops from 1.2 meters (4 feet). It’s designed for use in demanding environments such as industrial sites, sports facilities, and outdoor events.

• Versatile SMART Pads II: Compatible with both adults and children. By inserting the optional Infant/Child Key, the defibrillator adjusts its energy output and instructions, eliminating the need for separate pediatric pads.

• Clear Voice Instructions with CPR Guidance: Provides real-time, step-by-step voice commands and CPR coaching, including an audible metronome to guide chest compression rates.

• Quick Shock Delivery: Delivers a shock typically within 8 seconds after CPR, minimizing interruptions and improving the chances of survival. View Document

• Automatic Self-Testing: Performs daily, weekly, and monthly self-checks to ensure operational readiness. Indicators notify users of the device’s status, including pad and battery condition.

• Long Battery Life: The FRx has a battery standby life of up to four years, reducing maintenance and ensuring reliability when needed.

Why Choose the Philips HeartStart FRx Defibrillator?

The Philips HeartStart FRx combines advanced technology with rugged durability, making it an excellent choice for workplaces, schools, and public access areas. Its versatile design, user-friendly interface, and dependable performance ensure you're always prepared for cardiac emergencies, even in the toughest conditions.

Don't forget to book your AED training!

Read our guide on Philips defibrillators

The Philips FRx makes training easy: Simply insert the Training Pads II (available separately) to temporarily disable the FRx’s energy delivery capability and switch into training mode. Eight realistic SCA scenarios are designed to keep you and your team confident and prepared when the moment arises.